Samsung is introducing more and more washing machine units with every passing day and this directly means that the customer list is also increasing rapidly. This factor is leading to an increase in online searches about Samsung washing machine error codes and their solutions.
Samsung delivers a manual along with the washing machine but if you have lost that one, you may be wondering what the Samsung washing machines error codes indicate and how to shut them off.
For that reason, we have gathered all the error codes along with their causes and solutions. These solutions will get things sorted in most cases but if not, this could be a hardware issue that requires additional troubleshooting, diagnosis, and professional assistance.
Samsung washing machine error code 1E, E7
Cause:
This error can be caused due to multiple reasons such as:
- There are some clogs or blockages in the hose system.
- The Hose system is damaged such as splits and deterioration.
- Some issues with the pressure sensor.
Solution:
The error can be resolved by:
- Check the hose system and remove if something is causing the blockages such as debris.
- Call a professional to repair if there are splits or deterioration.
- If you don’t get a response, replace the pressure sensors.
Samsung error code 3E, EA, EB
Cause:
Many things can become a cause of these errors such as:
- An issue in machine wiring.
- Fault in PCB (Printed Circuit Board).
- Loosely attached connector.
Solution:
You can resolve this error in the following ways.
- Check if there is some open circuit and secure it, if any.
- Ensure that all connectors are attached properly.
- Call a technician for assistance if things are not understandable for you.
Samsung washing machine error code 3E1
Cause:
This error can occur if there is too much load on the motor. This can happen because of too many laundry problems and some technical issues as well.
Solution:
The error can be taken down by following the steps.
- Check and make sure that you have put an appropriate amount of laundry in the washing machine.
- Verify that the motor hall sensor terminal is connected at its place.
- Get technical assistance as this could be a PCB fault.
Samsung washing machine error code 3E2
Cause:
This error occurs when motor driving is experiencing some kind of issue. This could be:
- An issue in PCB.
- The relay operation is not stable.
Solution:
The error can be taken down by the following methods:
- Seek some professional help to repair your motor driving.
- Replace the Motor PCB after a discussion with the technician.
Samsung washing machine error code 3E1
Cause:
This error can occur due to reasons like:
- Some issues in the motor hall sensor.
- PCB is at fault or there is some damaged connection.
- The Quiet Drive Motor is displaced from its original position.
Solution:
- Getting technical help from a professional is the best suitable solution for such problems as they are deep errors and need to be solved efficiently.
Samsung washing machine error code 3E4
Cause:
This error can occur because of multiple issues or damages in the Quiet-Drive Motor Defect. The cause could be a:
- Fault in Printed Circuit Board (PCB).
- Disconnected housing terminal of PCB.
- The quiet-motor drive is itself damaged or faulty.
Solution:
- Seek technical help for repairing or replacing the quiet-drive motor or its parts.
Samsung washing machine error code 4E, E1
Cause:
This error can occur when:
- The pressure sensor is unable to detect that the washing machine is being filled with water.
Solution:
There are multiple ways to resolve this error.
- Ensure that the water tap is open and water is coming into the unit with enough pressure. The manufacturer suggests water pressure be at a minimum of 0.5bar while the maximum limit is at 8bar.
- Make sure that the hose is kinks-free and that there aren’t any blockages in the water valve.
- Ensure water valve coil resistance is between 4 to 5kΩ.
- Replace the hose if it is split, cracked, or leaked.
Samsung washing machine error code 4E1, 4ED
Cause:
This error is reported by Samsung washing machines if the water hose is attached to the hot supply.
Solution:
There is only one solution to this error.
- Make sure that the water hose is connected to the cold supply as the hot supply is not compatible with this purpose, at all.
Samsung washing machine error code 4E2
Cause:
This error occurs only because of one reason.
- The water temperature is too high for the wash cycle you have selected for your laundry.
Solution:
You can resolve this error by:
- Making sure that the water temperature is suitable for the selected wash cycle. You can get help from fabric manuals or may search online for suitable temperatures.
Samsung washing machine error code 5E, E2
Cause:
This error is reported by the machine, mainly because of two reasons.
- The water drainage pipe is cracked, kinked, blocked (mostly because of debris and materials like lint, hair clips, coins, and threads), or leaked.
- Some electrical issue in the washing machine.
Solution:
This error can be resolved in the following ways.
- Check if something is stuck in a drainage pipe.
- Remove kinks in the water drainage pipe.
- Call a technician if there is a 5E or E2 error as there could be an electrical issue.
Samsung washing machine error code 6E
Cause:
This error occurs if the water heating system of the Samsung washing machine is faulty in any regard.
Solution:
You can do multiple things to resolve this error.
- Ensure that the water heater resistance is somewhere about 27Ω.
- Take professional help to diagnose the heating system and thermistor as they could be at fault.
Samsung washing machine error code 8E
Cause:
This error is reported by the washing machine if wrong or too much current is being supplied to the machine.
Solution:
This error can easily be resolved in a couple of steps.
- Turn off the washing machine for about 30-60 seconds and let it cool down. Turn ON the machine again.
- Ensure that no windings or circuits connected to the machine’s inverter motor are open.
Samsung washing machine error code 8E1
Cause:
This error can be caused due to issues like:
- Inconsistent or wrong current being supplied to the washing machine.
- The MEMS sensor is defective. The sensor is situated right at top of the unit’s water tub.
Solution:
This error can easily be resolved in the following ways.
- Turn OFF the machine for some time and let it cool down completely. Turn it ON again.
- If the error persists, seek professional help to check MEMS sensors. Replace the sensor if it’s faulty.
Samsung washing machine error code 9E1, 9E2, PH1, PL0
Cause:
The only cause of this error is something faulty, defective, or any other kind of issue in the power sector of the washing machine.
Solution:
The error can be taken down by checking different power parts of the machine.
- Check to ensure the supply voltages are consistent and enough.
- Check if there is a loose or broken power connector or wire.
- Try changing the power fuse and noise filters of the machine.
Seek professional help if you are not used to this work as it involves electronics which can be dangerous for a layman.
Samsung washing machine error code AE, 13E
Cause:
This error occurs only when the main PCB is unable to communicate with the sub PCBs. This could be an issue in the connectors that act as paths between these PCBs.
Solution:
The error is a bit tricky to replace by yourself socially if you don’t have enough knowledge about electronics.
- Seek professional help from technicians to check all the connectors between main and sub PCBs.
Samsung washing machine error code bE
Cause:
This error can only occur if Motor TRIAC Short is experiencing any kind of issue.
Solution:
The error can easily be resolved by a simple technique.
- Turn OFF your washing machine and let it wait for a few minutes. Reconnect the washing machine again and turn it ON once it is cooled down.
- If you don’t get any response, repair or replace the PCB.
Samsung washing machine error code bE1, 12E
Cause:
This error is only reported when you press the power button of the machine for a relatively long time. The normal time limit for this error to trigger is 13 seconds.
Solution:
The error can easily be resolved by a simple technique.
- Turn OFF your washing machine and let it wait for a few minutes. Reconnect the washing machine and turn it ON again.
Samsung washing machine error code bE2, 14E
Cause:
This error is known as the control button and is triggered when any of the washing machine buttons are pressed for longer. The time limit for this error to trigger is 30 seconds in most machines.
Solution:
The error can easily be resolved by a simple trick.
- Turn OFF your washing machine and let it wait for a few minutes and then turn it ON again.
Samsung washing machine error code bE1, 18E
Cause:
This is a switch error and the most probable cause of this is any kind of defect or fault in the relay.
Solution:
Calling a technician and getting help from a professional is a better option as relay faults are not easy to resolve for a layman.
Samsung washing machine error code CE, E8
Cause:
This is a cooling error that is only reported by Samsung washing machines when:
- The water in the tub is not cooling down even after the machine has completed its washer cooling operation of 30 minutes. The error will trigger if the temperature is above the 55°C limits after a period.
Solution:
The error can be resolved by tweaking and checking parts related to the cooling system.
- Ensure that the water supply hose is attached to the cold-only feed and not the hot water supply.
- Check and make sure that the cold water supply is correct and not switched over.
- If you are still getting the error, the heater temperature sensor could be at fault. Repair it or get it replaced.
Samsung washing machine error code dE, Ed, eD
Cause:
This is related to the washing machine’s door and is reported if:
- The door is opened or not locked properly.
Solution:
There are simple things to resolve this error.
- Open the door and close it again while making sure it is locked.
- Remove debris from the door, if it is blocking it.
Samsung washing machine error code dE1
Cause:
This error occurs due to one reason.
- The lock switch of the machine’s door is defective or damaged due to any kind of reason.
Solution:
The error can easily be resolved in two ways.
- Thoroughly look at the door lock switch to see if there is some crack, damage, blockages, or any other issue.
- Get it repaired or replaced thoroughly if nothing is working out.
Samsung washing machine error code dE2
Cause:
This error is reported if there is:
- Some issue with the Samsung washing machine’s ON/OFF switch.
- The temperature in the coil is increasing. This happens if the ON/OFF button is being operated continuously.
Solution:
There is only one solution to this error which is to let the On/Off switch rest instead of using it consistently for a longer period.
Samsung washing machine error code FE
Cause:
FE stands for Fan Error and this is a clear indication that there is an issue in any part of the dryer or air refresh fan such as the:
- An issue in the motor powering the fan.
- Broken connectors or connections.
- The fan itself is faulty.
Solution:
To resolve this error, you need to do the following things.
- Ensure that the fan is not jammed with debris.
- Check if the condenser or the capacitor is at fault.
- Make sure that connections are in place and not broken.
- Replace the fan capacitor if nothing seems to work out.
Samsung washing machine error code H1
Cause:
This error is related to the heat or temperature of water in the Samsung washing machine.
- It occurs when sensors are detecting a rapid increase in the water temperature.
Solution:
Check a few things and you will be able to resolve this error.
- Check if the pressure switch is working fine.
- Check that the hose is placed in the right position.
- Check if sensors are at fault themselves. Replace them if that’s the case.
Samsung washing machine error code HE
Cause:
This error is also related to the high water temperature in the washing machine. This error triggers when the water temperature rises even more than 100°C.
Solution:
This error can be resolved in the following ways.
- Make sure that you are supplying normal or cold water in the water tank of the washing machine.
- Check if the sensors are working correctly. If not, get them replaced.
Samsung washing machine error code HE1, E5
Cause:
This error is related to the water heater and can be triggered in two conditions.
- The water temperature in the washing machine is below 2°C even after 20 minutes.
- The water temperature hasn’t reached 50°C after 20 minutes.
Solution:
It is better to seek professional help as this issue is very complicated and tweaking something wrong can make things worse. However, you can try tricks like:
- Check the heater resistance using a meter. The resistance should be somewhere about ~27Ω.
- Check sensors for defects or faults.
Samsung washing machine error code HE2
Cause:
This error occurs because of one reason.
- Any kind of issue with the dryer heater. The error is mostly triggered if the circuit is open circuit.
Solution:
Below are some things you can do.
- Check the dryer heater TCOs.
- Check if the fan is running properly.
- Check the water valve operation in the dryer heater.
- Ensure that there isn’t any debris or something stuck in the condenser and causing the clogging.
It is always better to get professional help because these things are quite complex and can lead to other issues as well.
Samsung washing machine error code HE3
Cause:
This error is reported by the Samsung washing machine when:
- The steam function is at fault.
- The steam function TCOs are defective or not as they should be.
Solution:
The error can easily be resolved in the following ways.
- Check that the steam function and TCOs are in good condition.
- Make sure that appliances are cold and that the appliance fan is running all the time.
Samsung washing machine error code LE, LE1, E9, 11E
Cause:
These errors are caused due to internal leakages of different parts of the Samsung washing machine. Leakage can happen due to any reason and need immediate assistance.
Solution:
The error can be resolved after a thorough analysis of the machine.
- You need to check all parts and secure the leakage.
- Make sure that the water drain hose is placed at a lower level than the bottom of the machine.
Samsung washing machine error code OE, E3
Cause:
These errors are triggered if there is a detergent/liquid overflow in the washing machine.
- You have added too much detergent to the water tank.
Solution:
Overflow can be stopped as easily as you think.
- Clean out some foam from the washing machine tub.
- Let the drain pump work to take all the excess foam out of the washing machine.
- Analyze the pressure system and remove anything that is causing the blockages such as debris.
- Turn the washing machine OFF for about 30 seconds and then switch it back ON.
Samsung washing machine error code OF
Cause:
OF stands for Overflow and this error is reported by a Samsung washing machine when:
- Too much water has been added into the tub and now it has crossed the overflow limit of the tank.
Solution:
This error can be resolved by following methods.
- Take some water out of the tub to bring it back to the normal level.
- Ensure that the water valves are intact in their intended place.
- Remove debris, foam, latch, or any other things that can cause blockages in the pressure system.
Samsung washing machine error code t1, t2, tSt
Cause:
These errors are reported by the Samsung washing machine when it is being switched to test mode. This can happen due to many reasons such as:
- Pressing the wrong button or pressing a button too many times.
Solution:
There is only one technique to resolve this error which is as follows:
- Turn your washing machine OFF and wait for about 30 seconds. Now turn the machine back ON.
- If errors are still on the screen, repeat solution 1 quite a few times.
- If the error persists, call a technician for professional help.
Samsung washing machine error code tE, EC
Cause:
These errors are reported by the washing machine when its internal sensors are detecting abnormal temperatures. This usually happens when the temperature is too high.
Solution:
The error can be taken down the following way.
- Turn the washing machine OFF and wait for some time. Reconnect the power and turn it back ON.
- Check all internal sensors if they are working fine or if it’s their fault. Replace them if required.
Samsung washing machine error code tE1
Cause:
This error is particularly related to any kind of issue in the water heater sensor. This happens if:
- Connections between the sensors and the PCB are broken.
- Resistance is not stable.
Solution:
The error can be shut down in the following ways.
- Ensure that all the connections and connectors between PCB and water heater sensors are fine and in place.
- Check resistance using a meter and it should be somewhere about 12.8kΩ.
Samsung washing machine error code tE2
Cause:
This error is related to the fan housing duct sensor of the Samsung washing machine.
- Connections between the sensors and the PCB are broken.
Solution:
The error can be resolved by implementing the following tricks.
- Check that all the connections and connectors between PCB and fan housing duct sensors are fine and in place.
- Check resistance using a meter and it should be about 12.8kΩ.
Samsung washing machine error code tE3
Cause:
This error is related to the condenser duct sensor of the Samsung washing machine.
- Connections between the sensors and the PCB are defective or broken.
Solution:
You can do the following things to shut down this error.
- Check that all the connections and connectors between PCB and condenser duct sensors are fine and in place.
- Check resistance using a meter and it should be about 12.8kΩ.
Samsung washing machine error code UC
Cause:
This error is solely related to the issues in power supply as it can happen due to the following reasons.
- Voltages are not stable in the power supply. This can happen due to a power cut or an abnormal shock to the supply.
Solution:
This error should only be resolved by a professional as it is not a thing you can do as a DIY project. However, you may try the following things.
- Ensure that supply voltages are being supplied properly.
- Turn off or reset the power supply to its initial settings.
- Try replacing the main or sub PCBs.
Samsung washing machine error code UE, E4
Cause:
These errors are caused when the items or laundry in the washing tub is not being balanced and it is pulling the machine to one side. This can happen when some clothes get trapped together and sit on one side of the machine.
Solution:
This error can mostly be resolved by the machine itself as it will keep spinning and clothes can split apart. However, if it’s not happening, you can do the following things.
- Splits the trapped clothes and distribute them evenly in the whole washing machine tub.
- Ensure that shock absorbers are working fine.
- Ensure that the machine’s springs are in good shape.
“Your home is a representation of yourself, and it should only be filled with clean items that you enjoy and use”
Professional cleaning expert