How to clean range hood filter

Do you remember when you peeked down your stove and checked the exhaust fan filters? If you never checked it before, then you should check it now because the purpose of a range hood filter is to collect grease. If the hood filter not clean, your device may not perform in top-notch condition.

Over time the filter becomes so blocked with grease or ickiness that it later loses effectiveness. It requires regular cleaning of these filters.

How to clean range hood filter

So do you know the correct rules for cleaning the range hood filter? Or do you find how to clean the hood filter? If you don’t learn, you can read this article to find out the information read the article carefully.

The reasons why you clean your range hood filters

You have to take care of everything in the house and keep everything clean and tidy. Many people have never cleaned their filters in years, even in a decade. Top manufacturers recommend that you clean filters at least once a month.

There is some reason for range hood cleaning. Now I will discuss those articles with you.

  1. To increase improved energy efficiency.
  2. For the long life of the blower.
  3. For sufficient grease and smoke removal.
  4. For easier cleaning.
  5. To protect things.

If not cleaned for a long time, grease may accumulate in it. It can cause filters to become blocked and lose their effectiveness. So we should clean it regularly to maintain its effectiveness.

Range hood cleaning

To many, it may seem like a long process. But it depends on how much dirt and which method applies to clean your range hood.

There are many methods that you can use to clean the range hood. If your range hood is more greasy, you will clean your range hood in a lower form.

All you need to do is it-

  1. First of all, you need a lot of hot or boiling water.
  2. Then you will need degreasing dish soap.
  3. Then you need baking soda.
  4. Then take a non-corrosive scrub brush.
  5. Lastly, you will need a paper towel or dishcloth.

Using these five materials, you can easily clean your range hood. Now I’m describing to you the process.

Range hood filter cleaning Instructions

Remove filters from hood

Vastly filters should slide or pop out from under the hood. The mine has a metal loop that can push the filter and prevent it from the side.

A sink or bucket needs to be filled with boiling water.

It will be more effective when the water is very hot from your tap.  It could be reasonable enough.

Then use baking soda or dish soap.

Squirt well in degreasing dish soap and 4 tablespoons baking soda in hot water. Keep mixing with a brush till the water is nice and foamy. But the thing to remember is don’t use your hand instead of a meeting because it is boiling.

Keep immerse greasy filters in water.

Immerse your greasy exhaust fan filter well in water. Make sure that they are entirely covered.

Keep them wet

Soak the filters in water for 10 minutes. It will get the dirt well wet, and it will be easier to clean.

Scrub the filters well

After soaking the filters, scrub them thoroughly with a corrosive scrub brush. When washing, add more dish soap to your meeting.

Then wash the filters and let them dry.

Wash the filters adequately in hot water. Next, take a paper towel or clean cloth for drying them.

Then renovate the filters and reproduce as needed.

Put the filters in the hood and Recite this as needed. It is best to clean the filter at least once a month.

Besides all this process, you can also use vinegar for cleaning your hood filters. Now I will tell you this process.

Cleaning range hood filter with vinegar

At first, you have to combine a few drops of dish soap in a cup of vinegar. Then en places the mixture on top of the grease filter. Then let it rinse for 20 minutes. Use a soft scrub to remove stains after 20 minutes.

The acidity of vinegar helps to cut through the grease easily.

Kitchen hood cleaning

Everyone should keep the kitchen very clean and tidy. The kitchen hood and range hood cleaning methods are almost the same. Again I will tell you how to clean the kitchen hood.

At first, you need to fill your sink with warm water, dish soap, and baking soda. Then rinse the filter in the cleaning treatment for at least 20 minutes. Then continue rubbing with a soft scrub to remove stains from the wet area. Keep rubbing until the dirt is gone.

You can get relieved of sticky scraps if you want. 

For this, All you have to do-

Mix both equal parts of baking soda and water in a container to fight greasy residue. It cannot remove the vinegar. You can make a thick paste and add more baking soda as needed until your solvent is dense.

If you apply this paste to the filters, you will get rid of grease.


If the filters are clean for a long time, grease accumulates in it and reduces its effectiveness. To maintain its effectiveness, we should all maintain it properly.

We should clean or replace the filters at least twice a week. However, restaurants that do not use much grease or oil have their filters extended to four weeks. Experts recommend cleaning filters at least once a month.

If you don’t want to be frustrated, you cannot get the right angle, so invest in a great capo. This is the principal purpose of why you have to keep control perfectly.

I hope I have able to give you the right solution to your problem.

Thanks for reading this article. You can also pass the article to your close one those who are interested in this.

You may also like the below household cleaning articles